Micro USB/MHL to HDMI VGA Splitter Adapter for Samsung Galaxy Note£» Description£º MHL Recever with embedded controller to support the Audio,HDMI and VGA outputs. The on-chip HDMI/MHL/HDCP/CEC/CBUS controller makes the user very easy to use the chip.It manages MHL RX, HDMI TX and HDCP function automatically without the need for user to develop firmware.The CEC Controller provides the CEC physical layer transceiver and handles the protocol layer automatically.The CBUS Controller provids the traslation between the MHL RAP/RCP Pequest and the HDMI CEC Command automatically. The chip supports 1 MHL RX port and 1 HDMI TX port the with repeater function. The chip also supports decoded Audio and VGA output. The chip is compliant with HDMI1.4 and MHL 2.0 specification. In HDMI RX, this chip supports SD/HD Audio and Video in 12-bit Deep Color up to 1080p(225Mhz TMDS clock). In MHL RX,this chip supports the resolution up to 720p 60 Hz, 1080p 30 Hz or 1080p 60Hz in PackedPixel Mode. The chip also supports on-chip HDCP RX/TX engines and EDID RAM. Features£º Color: White. Micro-USB connection to your smart phone. Listen to stereo sounds by connecting audio adapter with 3.5mm audio cable. MHL/HDCP controller which manages MHL RX,HDMI TXand HDCP automatically. without the need for user to develop firmware. CBUS controller which provides the translation between the MHL RAP/RCP Request and the HDMI CEC Command. MHL Recever core which is compliant with HDMI 1.4 and MHL 2.0 specification. HDMI Trnsmitter core which is compliant with HDMI1.4 specification. HDCP RX/TX Engine which is compliant with HDCP1.4 specification. DAC supporting up to 150 Mhz pixel rate for VGA output port. Support HDMI Repeater function. Audio Decoder which support 2-channel IIS and S/PDIF sudio outputs. Support YCC422 TO YCC444 conversion. Support YCC to RGB converdion in ITU-R BT.601 and 709 color space. Support Separate Sync and/or SOG (Sync On Green) on VGA output. Support LPCM and Compressed Surround Audio. Follow the steps below to connect: 1. Connect HDMI cable between MHL adapter and TV(HDMI cable not included). 2. Connect home charger to the MHL adapter for power supply. 3. Connect your device. Package Content: 1 x MHL to HDMI VGA Splitter Adapter 1 x 3.5mm AUX Cable No Retail Packing